The Swan Corporation - BS-2515

Below are all the different types of The Swan Corporation. Select the device of your choice, to download the manual

Contents

SWANSTONE Your Strongest Choice BAR SINKS TOOLS REQUIRED Ruler Drill Caulk Saber Saw if counter top cutout is required 1 If it is necessary to cut out the counter top invert sink and position onto the counter top Locate sink front to rear and so that the bowl will not interfere with the cabinets below Trace a pencil line around the outside edge of the sink and remove the sink from the counter top 2 Measure in 5 16 from the initial sink outline and draw a second line inside the first Draw a 1 1 2 radius at each corner This second interior line will be your cutout line Check Cutout Line Measurements Model Width Depth BS 1515 14 3 8 14 3 8 BS 2515 24 3 8 14 3 8 3 Drill starter hole inside of cuto ...